|
|
Circuit Theory and Vizualizations
Molík, Petr ; Kaluža, Vlastimil (referee) ; Kunovský, Jiří (advisor)
This Bachelor thesis is concerned with modern method of interpretation and presentation of the Circuit theory. Clearly illustrates and with applied tests demonstrates theory, which is learned in Circuit theory subject, part of Bachelor's degree study program on Information technology on Brno University of Technology. Thesis consists of short introduction into method of visual education, main elaborated topics and description of prepared information system, which cover whole project. Thesis ends with system evaluation and usage of topics for students and references by students, they have already used described project.
|
|
|
Harness tester
Smola, Tomáš ; Bohrn, Marek (referee) ; Pavlík, Michal (advisor)
This thesis deals with issue and construction of wire harness tester. In the first place, is this thesis focused on market exploration and comparison of comercial testers with concrete requirements for small batch production. I will try to find a suitable product in worldwide market, which would be convenient for company producing construction machinery. For testing switchboard harness we need to test interconnections between connectors, resistors, relays, diodes, transils and switches in the dashboard. If I can not find some product, I will try to design some new tester. My priorities will be testing all components in harness, maximum flexibility of tester for the future trends in contruction of rollers and user friendly control.
|
|
|
Examples in environment ARMmbed
Maraczek, Patrik ; Marada, Tomáš (referee) ; Zuth, Daniel (advisor)
The bachelor’s thesis contains basic information for working with microcontroller properly in ARMmbed integrated development environment. Thesis describe microcontroller, microchips, chip’s periphery, ARMmbed environment. Also manual is written for this environment. Four examples are solved at the end of thesis to explain how extended devices and sensors are working. Devices like 4-bit seven-segmented display, LED diodes, ultrasound sensor SRF02.
|
|
|
DC/DC step-up converter for notebook
Škunda, Michal ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
Given bachelor’s thesis devoted to a proposal and implementation of transducer STEP-UP for supplying of notebook in car. Introduction presents dividing of switching power supplies followed by a choice and a proposal of power supply. In this work we can find the specific proposal of inductor, the proposal of electronic connexion and the proposal of PCB layout. There is a software EAGLE used for the design of PCB layout. In the last part of work there are particular courses of current and voltage that characterize power supply pictured. The work contains measured load characteristic of switching power supply loaded by notebook as well. Notebooks need to have quality power supplies that is why there was a special attention paid to the quality of supply and its electric parameters.
|
|
|
Semiconductor diode modelling
Pacholík, Vladimír ; Wilfert, Otakar (referee) ; Pokorný, Michal (advisor)
This project is about phenomena, which proceed in semiconductor, eventually on semiconductor junction, including equations and relatives necessary for modeling simply semiconductor PN diode, Gunn diode and Schottky diode. Further including short way, how to use this equations and how simulate this diode in COMSOL Multiphysics and Tiber CAD software. Products of modeling are data in charts form. This charts giving basic idea about charge carriers, electrostatic potential and I-V characteristic.
|
|
|
Design and properties of low-frequency amplifier with vacuum valves
Piroha, Ladislav ; Musil, Vladislav (referee) ; Šandera, Josef (advisor)
The purpose of the bachelor’s thesis is explanation of theory and construction of low frequency tube audio amplifier with UV meter. Main focus is on history and development of vacuum circuits from its early beginning, on electrical parameters and applied physical principles. Explanation of operating characteristics of amplifier classes and comparison of vacuum tube sound acoustic performance against transistor amplifier one. Finally, there is build description of single ended amplifier class A.
|
|
|
Measurement of meteorological variables
Škorpík, Daniel ; Harabiš, Vratislav (referee) ; Chmelař, Milan (advisor)
This bachelor thesis discusses about the basic meteorological variables, especially temperature and airflow. These magnitudes are measured using an anemometer which uses resistive sensors, namely, two thermistors of NTC type that described technology, operations, methods of scanning, sensor placement and implementation of such a device. After that was designed block diagram and circuit diagram. The meter is realized, than we describe the individual components and then is calibrated and tested. In conclusion, it is evaluated for use in medicine.
|
|
|
Nonlinearity in the course of acqusition date in optical coherence tomography
Kadla, Jan ; Kolář, Radim (referee) ; Kuna, Zdeněk (advisor)
This bachelor thesis builds on my semestral work, thus provides a description of the problem of optical coherence tomography imaging system in terms of a brief historical development, structural parts and modifications. Previous work is supplemented by a more detailed description of data acquisition and especially signal processing. I present examples of the clinical and research application of this technology, and try to objectively refer to its advantages and disadvantages. Chapter dedicated to the description of a practical measurement explains selected data collection procedure and clarifies their following processing. At the end of the work are summarized the results achieved, including the considerations of potential errors during the measurement.
|
|
|
Universal controller for car or motorcycle dynamo
Picmaus, Jan ; Knobloch, Jan (referee) ; Červinka, Dalibor (advisor)
The thesis deals with the issue of design of an electronic controller of charging for historical cars using a dynamo. It contains theoretical analysis of the machine itself (dynamo) and analysis of a shunt wound dynamo and a seperately excited dynamo. It~is also focused on possible usage of a dynamo in various vehicles. The work compares industrially produced controllers with amateur manufacture as well as confronts their positives and negatives. All requests for the implemented controller are deduced from the analysis of the industrial and amateur controllers. The thesis consists of process plan of controller connection including the final working version and also the project and realization of a PCB as well as following description of putting the controller into practice and installation in the car. The thesis includes the project of current and voltage controllers, following adjustment and operation tests with use of the real device.
|
|
|
Market survey of high power semiconductor devices
Jankovský, Martin ; Rujbrová, Šárka (referee) ; Zmrzlá, Petra (advisor)
Hlavním tématem práce jsou moderní výkonové polovodičové součástky. Jsou diskutovány i rozvíjející se materiály s velkou šířkou zakázaného pasu a jejich elektrické vlastnosti. Práce je pak zaměřena na tyto moderní součástky, včetně jejich teorie, aplikace a dostupnosti na trhu. Dále práce předkládá tabulky jednotlivých zařízení, které jsou nabízeny evropskými předními výrobci polovodičů.
|
guest ::
